Outdoor Furniture




      cast iron/wood bench restored
        Cast Iron Bench Restored

      This is how I restored a cast iron bench.
      I bought six WeatherShield 1 x 2 x 8 Pressure-Treated Pine Strips with the rounded edges for $1.97 each at Home Depot and had them bundle cut at Home Depot for free into 12 four-foot strips.
      wood bench strips

      I used BEHR PREMIUM WOOD COATINGS TRANSPARENT WEATHER PROOFING ALL IN ONE WOOD FINISH left over from weatherproofing our new deck and applied two coats to the strips. I like the natural wood color.

      I used gloss black spray paint for the cast iron sides that was $.97 a can and used new steel bolts and nuts also some 1 inch screws for the small metal braces that fit under the strips. I drilled holes in the strips, inserted bolts and tighten nuts then reinforce with screws in the braces.
                                                                 cast iron bench sides
      I loved this project. It was so easy and fast and the results were better than I expected. The bench was falling apart, now it’s sturdy, weather-proofed, and ready to add to my new deck.
       

      This is the before picture you've been waiting for.


      Restoring a Glass Table
      weather proofed moinstue resistant plywood underlayment table top
      Our outdoor glass table was blown over by the wind and shattered. This is how I restored it.
      I used 1/4 in x 4ft x 8ft Moisture Resistant Plywood Underlayment from Home Depot to replace the glass table top. We had the plywood left over from another project.  All you have to do is turn the table upside down on the plywood and trace and cut. You'll have to take the table apart to insert the plywood. It fit perfect inside the frame where the glass had been. A center hole was cut with a jig saw for the umbrella.
      I weatherproofed it with 4 coats of BEHR PREMIUM WOOD COATINGS TRANSPARENT WEATHER PROOFING ALL IN ONE WOOD FINISH left over from weather proofing our new deck. I really love this weather proofing product.
       I spray painted the metal frame gloss black.
      This was an easy and fast project that gave me my table back for enjoying meals on the deck. I bought a new umbrella that I found reduced for $15 which was the only expense.
      glass table top replaced with weather proofed plywood underlayment

      No before picture this time. I couldn't bare to take one of the shattered glass.

      Restoring Metal Frame Outdoor Dining Chairs

      I was so motivated after restoring the wood strip bench and glass table that I found the old worn fabric chairs and restored them also. The frames were good strong metal just like new. This is how I restored them.
      I bought the WeatherShield 1 x 2 x 8 Pressure-Treated Pine Strips with the rounded edges for $1.97 each at Home Depot to replace the fabric on the 4 metal-framed chairs. I bought 12 of the 8 foot strips and they were cut into 18 inch sections. 

      I weatherproofed them with two coats of BEHR PREMIUM WOOD COATINGS TRANSPARENT WEATHER PROOFING ALL IN ONE WOOD FINISH left over from weatherproofing our new deck. I spray painted the metal frames with gloss black paint.
       
      I bought over 100 steel bolts and nuts and used an electric drill to drill through the wood strip and into the chair frame at the same time. Then I just inserted the bolts and tightened the nuts. It was easier for me to take it one strip at a time.
       
      I am so pleased with the results. The chairs are so sturdy and unlike the cloth chairs, they don’t sag or sink down. After years of plastic chairs and cloth chairs, I am impressed with strength and stability of the new wood chairs. Now I have  all new furniture to compliment my deck.
      metal frame outdoor dining chairs

      This is the before picture you are not going to believe!
      Restoring a Metal Chair




      Restored Metal Chair
       
      I found a rusty old metal chair and wanted to restore it. This is my story.
       
      First I cleaned it with some bleach water. I used a wire brush and dry cloth to wipe it down. I replaced a few bolts and nuts that needed to be replaced but was careful to retain what was left of the integrity of the chair.
      RUST-OLEUM RUST REFORMER
      Next I used Rust-Oleum Rust Reformer that I found at Walmart for $4.97. I coated the entire chair with two coats. It's a flat black color.
      RUST-OLEUM Stops Rust Spray, American Red 
      I let that dry a few days and then spray painted it with two more coats of Rust-Oleum Stops Rust Spray, American Red.
       
      Turtlewax Paste Wax
      Once the paint had cured or really after several weeks, I applied Turtle Wax Paste Wax. I found a small can with applicator at Walmart. Now we will just have to give the old chair the test of time. 
       
      Here is the before picture.
       
       
      What do you think?
       
       

      2 comments:

      1. To provide secure and stable holding power, Anchor Accessories recommended. Demir Leather & Furniture

        ReplyDelete
      2. I really like your content it is really very inspiring for I guess I have selected a mind blowing and interesting blog.bestreviewscribe

        ReplyDelete

      I encourage you to leave comments. I will try to answer questions to the best of my ability excluding personal information. I am not an expert and may not be able to answer without further research or experimentation. Thank you for taking the time to comment. I apologize for any mistakes or miscommunication. I will try to edit or correct any mistakes as soon as possible. I will delete any comments that I consider offensive to my readers.